Child Seat

Removal Procedure
1. Remove the rear window garnish molding.
2. Remove the rear inner panel carpet.
3. Remove the anchor-plate, spacer, washer, and bolt.
4. Clean outer surface of the anchor-plate bolt hole.

Installation Procedure
1. Apply the appropriate sealer to the outer surface of the anchor-plate bolt hole.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the anchor-plate, spacer, washer, and bolt.

Tighten
Tighten the anchor-plate retaining nut to 30 N.m (22 lb ft).

3. Install the rear inner panel carpet.
4. Install the rear window garnish molding.