Knock Sensor: Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to Vehicle Lifting Caution in Service Precautions.




1. Raise the vehicle.
2. Remove the knock sensor wiring harness connector from the knock sensor.




3. Remove the knock sensor from the engine block.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.




1. After cleaning the threads thoroughly, install the knock sensor into the engine block.

Tighten
Tighten the knock sensor to 19 N.m (14 lb ft).




2. Install the KS wiring harness connector to the knock sensor.

CAUTION: Refer to Vehicle Lifting Caution in Service Precautions.

3. Lower the vehicle.