Pressure Cycling Switch Replacement

REMOVAL PROCEDURE
1. Disconnect the A/C control switch connection.
2. Remove the A/C control switch.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.

IMPORTANT: Counterhold the compressor/condenser hose using a wrench.

1. Install the A/C control switch:
^ Use new O-rings.
^ Lubricate the new O-rings using mineral oil, 525 viscosity.

Tighten
Tighten the A/C control switch to 7 N.m (62 lb in).

2. Connect the A/C control switch connector.