Upshift Lamp

Outputs:

IMPORTANT: The output table does not list all of the IPC LEDs. The PC LEDs not listed are controlled by a different device. Refer to the applicable device when diagnosing IPC LEDs not shown in the table above.

Range ON/OFF (Manual Transmission Vehicle Only)

This output refers to the commanded state of the UPSHIFT lamp illumination by the IPC module.

ON is displayed when the IPC module commands the UPSHIFT lamp to be illuminated when a Class 2 message is received from the PCM/VCM.

OFF is displayed when the IPC module does not command the UPSHIFT lamp to be
illuminated.