Rear Bumper Bracket Replacement (Utility)

Rear Bumper Bracket Replacement (Utility)

Removal Procedure

1. Remove the rear bumper impact bar.




2. Remove 4 nuts and 2 stud plate assemblies securing the rear bumper bracket to each frame rail.
3. Remove the rear bumper bracket from the frame rail.

Installation Procedure






Notice: Refer to Fastener Notice in Service Precautions.

1. Install the rear bumper bracket to each frame rail with 4 nuts and 2 stud plate assemblies.

Tighten the rear bumper bracket nuts to 90 N.m (66.4 lb ft).

2. Install the rear bumper impact bar.