Instrument Panel Cluster (IPC) - Replacement

IP CLUSTER REPLACEMENT




REMOVAL PROCEDURE
1. Remove the instrument panel cluster trim plate.
2. Remove the four screws the retain the instrument panel cluster to the instrument panel.
3. Gently pull the instrument cluster straight out.

INSTALLATION PROCEDURE
1. Install the instrument cluster to the instrument panel:
1.1. Set the cluster in place in the instrument panel.
1.2. Align the cluster with the electrical connector on the instrument panel.
1.3. Gently press the cluster in order to seat the cluster into the instrument panel and onto the electrical connector.

NOTE: Refer to Fastener Notice in Cautions and Notices.

2. Install the four screws that retain the instrument cluster to the instrument panel.

Tighten
Tighten the four screws that retain the instrument cluster to the instrument panel 2 N.m (18 lb in).

3. Install the instrument cluster trim plate.