Door Switch: Service and Repair

REMOVAL PROCEDURE
1. Loosen the nut on the door jamb switch.
2. Pull the switch forward from the body.
3. Disconnect the door jamb switch from the electrical connector(s).
4. Tape the wiring to the body in order to prevent the wiring from entering the hole in the door pillar.
5. Remove the doorjamb switch to the vehicle.

INSTALLATION PROCEDURE
1. Install the door jamb switch to the vehicle.
2. Connect the electrical connector(s) to the door jamb switch.
3. Tighten the nut on the door jamb switch.

Tighten
Tighten the door jamb switch nut to 3 N.m (27 lb in).