Measurement Procedure

All measurements for the Child Restraint tether belt locations start from a center line. The lines run from side to side on the vehicle. The lines also run under the seat (bucket or bench). The lines for the seats are as follows:

1. For front bucket passenger seats, the centerline runs from the left rear mounting stud to the right rear mounting stud.
2. For rear bucket seats, the centerline runs from the left rear mounting stud to the right rear mounting stud.
3. For bench seats, the centerline runs through the pin in the left rear anchor pocket in the floor. The line then runs through the pin in the right rear anchor pocket in the floor.
4. For second rear bench seats, the centerline runs through the pin in the left rear anchor pocket in the floor. The line then runs through the pin in the right rear anchor pocket in the floor (1).