Installation Procedure

1. Install the guide adjuster bracket to the pillar.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the two guide adjuster bracket retaining bolts to the pillar.

Tighten
Tighten the guide adjuster bracket retaining bolts to the pillar to 20 N.m (15 lb ft).

3. Align the tabs of the C pillar side garnish molding trim with the openings in the pillar and push inward until fully seated.
4. Install the shoulder belt retaining bolt to the guide adjuster bracket.

Tighten
Tighten the shoulder belt retaining bolt to the guide adjuster bracket to. 53 N.m (39 lb ft).

5. Close the cover on the rear seat shoulder belt bolt.