Tilt Head - Assemble

ASSEMBLY PROCEDURE

- Tools Required
- J 23653-SIR Lock Plate Compressor





1. Install the following parts onto the steering shaft assembly:
1.1. The inner race (4).
1.2. The upper bearing inner race seat (3).
1.3. The upper bearing spring (2).
1.4. Lubricate the turn signal cancel cam assembly (1)
1.5. The turn signal cancel cam assembly (1).





2. Install the shaft lock shield assembly (1) onto the steering shaft assembly.





3. Install the bearing retainer using J 23653-SIR.
4. Install the SIR coil assembly. Refer to Inflatable Restraint Steering Wheel Module Coil - Assemble - Off Vehicle.