Door Replacement - Sliding

REMOVAL PROCEDURE



1. Support the door for removal, with the aid of an assistant.
2. Remove the center track cover.
3. Remove the bolts (5) from the center roller bracket (2) that attach to the door (3).




4. Remove the bolts (3) from the lower roller bracket (2) that attach to the door (1).




5. Remove the bolts (4) from the upper roller bracket (1) that attach to the door.
6. Remove the door from the vehicle.

INSTALLATION PROCEDURE



1. Install the door to the vehicle with the aid of an assistant.

NOTE: Refer to Fastener Notice in Cautions and Notices.

2. Install the bolts (4) to the upper roller bracket (1) that attach to the door.

Tighten
Tighten the upper roller bracket bolts to 25 N.m (18 lb ft).




3. Install the bolts (3) to the lower roller bracket (2) that attach to the door.

Tighten
Tighten the lower roller bracket bolts to 35 N.m (26 lb ft).




4. Install the bolts (5) to the center roller bracket (2) that attach to the door.

Tighten
Tighten the lower roller bracket bolts to 25 N.m (18 lb ft).

5. Install the center track cover.