Turn Signal Lamps

With the Ignition Switch in the RUN or START position, voltage is applied from the Turn-B/U Fuse to the normally closed pole of the Hazard Switch in the Turn/Hazard Switch. With the Turn/Hazard Switch in the LEFT TURN position, voltage is applied from the Switch to the LT BLU (14) wire and the DK BLU (914) wire LH front Turn, Rear Turn and Indicator Lamps flash ON and OFF as current flow is controlled by the Turn/Hazard Flasher Module, and it continuously opens and closes the circuit (for RH Turn Lamps DK BLU (15) wire and LT BLU (915) wire).