Turn Signal & Multifunction Switch - Disassemble

DISASSEMBLY PROCEDURE





1. Remove the upper and lower shrouds. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle.
2. Remove the wire harness assembly (4) from the wire harness strap (5). Remove 2 wire harness straps (3) from the wire harness assembly (4). Remove the wire harness strap (2) from the upper tilt head assembly (1).





3. Slide the 2 connectors (2) off of the bulk head connector (1).





4. Remove the 2 pan head tapping screws (1).
5. Remove the turn signal and multifunction switch assembly (2).