Rear Door: Service and Repair
REMOVAL PROCEDURETOOLS REQUIRED
J 41226 Hinge Pin Kit
1. Remove the side rear door trim panel.
2. Remove the swing out window or the stationary window.
3. Remove the weatherstrips, if needed.
4. Remove the side rear door upper and lower door wedges from the door.
5. Remove the upper and the lower door latches.
6. Remove the latch rods from the door.
7. Remove the latch handle.
8. Remove the latch striker.
9. Remove the side rear door hinge pins using J 41226-50.
10. Remove the side rear door from the vehicle.
INSTALLATION PROCEDURE
TOOLS REQUIRED
J 41226 Hinge Pin Kit
1. Install the side rear door to the vehicle.
2. Install the side rear door hinge pins using J 41226-50.
3. Install the latch striker.
4. Install the latch handle.
5. Install the latch rods to the door.
6. Install the upper and the lower door latches.
7. Install the side rear door upper and lower door wedges to the door.
8. Install the weatherstrips, if needed.
9. Install the swing out window or the stationary window.
10. Install the side rear door trim panel.