Lock Replacement - Front Door

REMOVAL PROCEDURE




1. Remove the front door trim panel.
2. Remove the water deflector.
3. Remove the rear run channel from the door.
4. Remove the lock rods from the lock.
5. Remove the electrical connectors from the lock (1).
6. Remove the lock rod guide from the door lock (1).
7. Remove the screws that retain the lock (1) to the door.
8. Remove the lock (1) from the door.

INSTALLATION PROCEDURE




1. Install the lock (1) to the door.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the screws that retain the lock (1) to the door.

Tighten
Tighten the retaining screws to 10 N.m (89 lb in).

3. Install the lock rod guide to the door lock (1).
4. Install the electrical connectors to the lock (1).
5. Install the lock rods to the lock (1).
6. Install the rear run channel to the door.
7. Install the water deflector.
8. Install the front door trim panel.