Horn: Service and Repair

REMOVAL PROCEDURE
1. Raise and support the hood.
2. Disconnect the electrical connector from the horn assembly.
3. Remove the nut (2) that retains the horn mounting bracket (1) to the vehicle.
4. Remove the horn assembly from the vehicle.

INSTALLATION PROCEDURE
1. Install the horn assembly to the vehicle.

NOTE: Refer to Fastener Notice in Cautions and Notices.

2. Install the nut (2) in order to retain horn mounting bracket (1) to the vehicle.

Tighten
Tighten the nut to 25 N.m (18 lb ft).

3. Connect the electrical connector to the horn assembly.
4. Close the hood.