Lubricant Replacement

Axle Lubricant Change

Removal Procedure

1. Raise the vehicle. Refer to Vehicle Lifting.





2. Remove the rear axle fill plug.





3. Remove the rear axle housing cover and the gasket.
3.1. Drain the oil into a suitable container.
3.2. Remove any gasket material from the rear axle housing and/or the rear axle housing cover.
4. Drain the oil into a suitable container.


Installation Procedure





1. Install the new rear axle housing gasket and the rear axle housing cover.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the rear axle housing cover bolts.

Tighten
Tighten the rear axle housing cover bolts in a crosswise pattern to 40 Nm (30 lb ft).

3. Fill the rear axle. Use the proper fluid.





4. Install the rear axle fill plug.

Tighten
Tighten the rear axle fill plug to 33 Nm (24 lb ft).

5. Lower the vehicle.