Lock Replacement - Rear Door

REMOVAL PROCEDURE




1. Remove the right side rear door trim panel.
2. Remove the lock rods (4) from the lock (1).
3. Remove the electrical connector from the lock (1).
4. Remove the screws (2) that retain the lock (1) to the right side rear door.
5. Remove the lock (1) from the right side rear door.
6. Remove the lock (1) from the vehicle.

INSTALLATION PROCEDURE




1. Install the lock (1) to the vehicle.
2. Install the lock (1) to the right side rear door.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the screws (2) in order to retain the lock (1) to the right side rear door.

Tighten
Tighten the retaining screws to 10 N.m (89 lb in).

4. Install the electrical connector to the lock (1).
5. Install the lock rods (4) to the lock (1).
6. Install the right side rear door trim panel.