SIR Steering Wheel Module Coil - Disassemble

DISASSEMBLY PROCEDURE
1. Remove the upper and lower shrouds. Refer to Trim Covers, Shift Lever Seal - Disassemble - Off Vehicle.





2. Remove the wire harness assembly (1) from the wire harness strap (2).
3. Remove and dispose of the smaller wire harness straps.





4. Remove the retaining ring (3) from the steering shaft assembly by using snap ring pliers.
5. Remove the inflatable restraint steering wheel module coil assembly (2) from the steering shaft assembly.
6. Remove the wave washer (1) from the steering shaft assembly.