Door Replacement - Side Front
REMOVAL PROCEDURETOOLS REQUIRED
J 41226 Hinge Pin Kit
1. Remove the side front door trim panel.
2. Remove the swing out window or the stationary window.
3. Remove the side front door inside handle.
4. Remove the side front door outside handle.
5. Remove the weatherstrips, if needed.
6. Remove the side door upper and lower door wedges from the door.
7. Remove the lock rod retainers from the side front door.
Rotate the retainers 90 degrees and pull the retainers out.
8. Remove the side front door latch.
9. Remove the side front door wiring harness.
10. Remove the side front door check strap.
11. Remove the side front door check strap seal.
12. Remove the side front door hinge pins using J 41226-50.
13. Remove the side front door from the vehicle.
INSTALLATION PROCEDURE
TOOLS REQUIRED
J 41226 Hinge Pin Kit
1. Install the side front door to the vehicle.
2. Install the side front door hinge pins using J 41226-50.
3. Install the side front door check strap seal.
4. Install the side front door check strap.
5. Install the side front door wiring harness.
6. Install the side front door latch.
7. Install the lock rod retainers by inserting the retainers into the side front door.
Rotate the retainers 90 degrees.
8. Install the side door upper and lower door wedges to the door.
9. Install the weatherstrips, if needed.
10. Install the side front door outside handle.
11. Install the side front door inside handle.
12. Install the swing out window or the stationary window.
13. Remove the side front door trim panel.