Turn Signal Lamps

When the ignition switch is in the run position and the turn/hazard switch is in a turn position, voltage is supplied from the TURN fuse through the turn/hazard switch to the turn/hazard flasher, CKT 1696. The flasher then passes current back to the turn/hazard switch in an intermittent on and off pattern, CKT 1697. From the turn/hazard switch, voltage is supplied to the LT TURN or the RT TURN fuse, CKT 14 or CKT 15. From the fuse voltage is supplied to the respective lamps on CKT 2114 left or CKT 2115 right.