Hazard

Voltage is available at all times through the STOP/HAZ fuse and the turn/hazard flasher to the normally open contact of the hazard flasher switch in the turn/hazard switch. With the hazard switch in the HAZARD FLASH position, voltage is available to both the front turn lamps and the rear turn lamps. All of the turn lamps and the turn indicators flash on and off.

The front marker lamps flash in the HAZARD FLASH position in the same manner these lamps flash in the TURN RIGHT position and the TURN LEFT position. If the headlamp and panel dimmer switch is in the OFF position, the front marker lamps flash when the hazard lamps are in operation. If the headlamp and panel dimmer switch is in either the PARK position or the HEAD position, the front marker lamps flash ON when the hazard lamps are not in operation; and the front marker lamps flash OFF when the hazard lamps are in operation.

In the HAZARD position, the circuit is always open, and the turn/hazard flasher controls the lamps.