Trailer Wiring

IMPORTANT: The trailer harness and fuses must be connected to the engine wiring harness junction block. The trailer harness circuits are identified in the following table. Please take note of the maximum current ratings of the circuits.

Stop lamps and turn signal lamps are similar to the description in Exterior Lights Circuit Description, with the exception of the following conditions:
- From the stoplamp switch, voltage is supplied to the turn/hazard switch on CKT 17 (WHT).
- From the turn/hazard switch, voltage is supplied to the TRL L Turn or the TRL R Turn fuse on CKT 18 (YEL) or CKT 19 (DK GRN).
- From the fuse, voltage is supplied to the trailer connector




Individual Conductors