Test Ran and Passed

This message displayed indicates that the selected diagnostic test has the following items:
^ Passed the last test
^ Ran and passed during this ignition cycle
^ Ran and passed since the DTCs were last cleared
^ This test has not failed since the DTCs were last cleared

Whenever the indicated status of the vehicle is Test Ran and Passed after a repair verification, the vehicle is ready to be released to the customer.

If the indicated status of the vehicle is Failed This Ign after a repair verification, then the repair is incomplete. A further diagnosis is required.

Prior to repairing a vehicle, use the status information in order to evaluate the state of the diagnostic test and to help identify an intermittent problem. The technician can conclude that although the MIL is illuminated, the fault condition that caused the code to set is not present. An intermittent condition must be the cause.