Linear Shift - Disassemble

Disassembly Procedure





1. Remove the upper and lower shrouds. Refer to Steering Column Trim Covers - Disassemble -Off Vehicle (Column Shift).Service and Repair
2. Remove the electrical BTSI actuator. Refer to Automatic Transmission Shift Lock Control -Disassemble - Off Vehicle.A/T Shift Lock Control - Disassemble
3. Remove the hexagon flanged head bolt and the ball and actuator assembly (2).
4. Remove the shift lever clevis (1).





5. Remove the park lock cable (1) from the lock module assembly.





6. Remove the 2 oval head 6-lobed socket tapping screws from the shift gate.
7. Remove the park lock cable assembly.





8. Remove the hexagon flange head bolt.
9. Remove the cable shift cam assembly (1).
10. Remove the cam bushing (2) from the cable shift cam assembly (1).





11. Remove 3 flat head 6-lobed socket tapping screws.
12. Remove the gearshift lever assembly support bracket.