Battery Cable Replacement-Auxiliary (TP2-Positive)

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.






1. Disconnect the negative battery cable.
2. Disconnect the positive battery cable.
3. Remove the auxiliary battery.
4. Remove the mega fuse from the auxiliary battery tray.
5. Disconnect the positive cable from the TP2 (relay)
6. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.






7. Remove the nut from the positive terminal of the starter.
8. Remove the positive battery cable from the starter.
9. Remove the positive battery cable.

INSTALLATION PROCEDURE






1. Install the positive battery cable.
2. Install the positive battery cable to the starter.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the nut to the positive terminal of the starter.

Tighten
Tighten the nut to 16 N.m (12 lb ft).

4. Remove the safety stands.
5. Lower the vehicle.






6. Connect the positive cable to the TP2 (relay).

Tighten
Tighten the nut to 9 N.m (80 lb in).

7. Install the mega fuse to the auxiliary battery tray.
8. Install the auxiliary battery.
9. Disconnect the positive battery cable.

Tighten
Tighten the nut to 17 N.m (13 lb ft).

10. Connect the negative battery cable.

Tighten
Tighten the nut to 17 N.m (13 lb ft).