Drive Belt Replacement (Accessory)

Removal Procedure





1. Use a wrench and rotate the drive belt tensioner clockwise.

Accessory Drive Belt Routing:

2. Remove the drive belt.
3. Slowly release the tension on the wrench.
4. Clean the drive belt pulley grooves.

Installation Procedure





1. Route the drive belt over all of the pulleys except the idler pulley.





2. Use a wrench and rotate the drive belt tensioner clockwise.
3. Install the belt onto the idler pulley.
4. Slowly release the tension, then remove the wrench.





5. Confirm that the drive belt is properly positioned in the pulley grooves.