Cam Unit 7.6 and 8.6 Disassembly/Assembly

Removal Procedure





1. Remove the retaining ring using snap ring pliers.
2. Remove the clutch plates and the guide clips.

Installation Procedure





1. Install the cam plate to the side cam gear.
2. Install the wave washer.
3. Install the clutch plates (7 5/8 ring gear = 8 plates, 8.6 ring gear = 10 plates). Alternate the plates.
4. Install the retaining ring (18).
5. Install the guide clips (13) and (16) to the clutch plates. Use grease in the clips in order to hold the clips in place on the plates.