Steering Column Trim Covers - Disassemble

Disassembly Procedure

Tools Required
- J 41352 Modular Column Holding Fixture





1. Remove the tilt lever from the lower shroud.
2. Set the steering column into J 41352.
3. Inspect the steering column for accident damage. Refer to Steering Column Accident Damage Inspection - Off Vehicle.





4. Remove 2 pan head tapping screws (2) from the lower shroud (1).
5. Remove the lower shroud (1).





6. Remove 1 TORX(R) head screw (1) from the upper shroud (2).
7. Remove the upper shroud (2).





8. Remove the shroud protector (1) from the lower shroud (2).