Radio/Stereo: Service and Repair

Radio Replacement

Removal Procedure

Caution: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.
2. Remove the instrument panel bezel.




3. Remove the radio mounting screws.
4. Remove the radio.
5. Disconnect the electrical connectors and the antenna cable.

Installation Procedure

1. Connect the electrical connectors and the antenna cable.




2. Install the radio.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the radio screws.

Tighten the radio mounting screws to 2 Nm (18 lb in).

4. Install the instrument panel bezel.
5. Connect the negative battery cable.