Outside Rearview Mirror Replacement

Outside Rearview Mirror Replacement

Removal Procedure




1. Disconnect the electrical connector (if equipped).




2. Remove the two bolts from the inside of the door holding the top mirror brackets to the door.
3. Remove the three bolts from the outside of the door holding the lower bracket to the door.
4. Remove the mirror assembly.

Installation Procedure




1. Install the mirror to the door.
2. Install the two bolts.
3. Install the washers.
4. Install the gasket.

Notice: Refer to Fastener Notice in Cautions and Notices.

5. Install the crown nuts at the top of the door.

Tighten the mirror to door nuts to 32 Nm (23 lb ft).

6. Install the three bolts through the lower mirror bracket into the outside of the door.

Tighten the mirror to door bolts to 17 Nm (13 lb ft).




7. Connect the electrical connector (if equipped).