84. Water Pump Installation

Water Pump Installation




1. Install the front lift bracket.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the front lift bracket bolt and stud.

Tighten the front lift bracket bolt and stud to 70 Nm (52 lb ft).




3. Install the water pump gaskets (2).
4. Install the water pump (1).
5. Install the water pump bolts (3).

Tighten the water pump bolts (3) to 40 Nm (30 lb ft).




6. Install the thermostat bypass hose (1) and clamps (2).




7. Install the engine coolant air bleed hose and clamps.


Tighten the engine coolant air bleed hose clamps to 5 Nm (44 lb in).