Air Cleaner Housing: Service and Repair
Air Cleaner Assembly Replacement
Removal Procedure
1. Loosen the clamp and remove the inlet front duct from the air cleaner assembly (1).
2. Loosen the clamp and remove the MAF sensor (4) from the outlet duct of the air cleaner assembly (1).
3. Remove the air cleaner assembly attaching bolts (3) from the air cleaner assembly mounting bracket (2).
Installation Procedure
Notice: Refer to Fastener Notice in Cautions and Notices.
1. Install air cleaner assembly (1) to the air cleaner assembly mounting bracket (2).
Tighten the air cleaner assembly attaching bolts to 5 Nm (4 lb ft).
2. Install the MAF sensor (4) onto the air cleaner assembly outlet duct (1).
3. Install inlet air duct assembly on to the air cleaner assembly (1).
4. Tighten the clamps on both the inlet and outlet duct of the air cleaner assembly (1).