Compressor Control Valve Assembly: Service and Repair

Compressor Control Switches Removal

Tools Required
* J 39500-B R-134a A/C Refrigerant Recovery, Recycling and Recharging System (ACR4)
* J 5403 Snap Ring Pliers
* J 9553-01 O-Ring Remover




1. Recover the refrigerant using the J 39500-B .
2. Disconnect the electrical connector from the switch (4) in the rear head of the compressor.
3. Remove the switch retaining ring using the J 5403 .
4. Remove the switch (4) from the compressor.
5. Remove the old O-ring seal from the switch cavity using the J 9553-01 .
6. Inspect the switch cavity and the O-ring groove in the rear head for dirt or foreign material. Clean the components as necessary.