Starter Motor Relay Replacement (Manual)

Starter Motor Relay Replacement (Manual)

Removal Procedure




1. Remove the electrical connector retainer.
2. Remove the electrical connector from the relay.
3. Remove the relay mounting screw.
4. Remove the relay from the cowl.

Installation Procedure




1. Install the relay to the cowl.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the relay mounting screw.

Tighten the relay mounting screw to 8 Nm (71 lb in).

3. Install the electrical connector to the relay.
4. Install the electrical connector retainer.