Rear Lower

Removal Procedure





1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Support the rear axle.
3. Remove the nuts
4. Remove the bolts
5. Remove the lower control arm.


Installation Procedure





1. install the lower control arm.
2. Install the bolts.

Notice: Refer to Fastener Notice in Service Precautions.

Important: Do not tighten the bolts unless the suspension is at the ride height.

3. Install the nuts.
- Tighten the bolts to 120 Nm (89 ft. lbs.).
4. Remove the rear axle support.
5. Remove the safety stands.
6. Lower the vehicle.