Lumbar Bladder Replacement (Bench Seat)

Lumbar Bladder Replacement (Bench Seat)

Removal Procedure

1. Remove the seat from the vehicle.
2. Remove the seat trim close-out strip at the bottom of the seat back.




3. Remove the rubber hose from the bladder assembly.
4. Remove the bladder mounting bars (1) from around the hooks on the frame.
5. Slide the bladder upwards, off the mounting bars.
6. Remove the bladder from the seat back.



Installation Procedure





1. Install the bladder to the seat back by sliding over the bladder mounting bars (1).
2. Install the rubber hose to the bladder.
3. Install the bladder mounting bars around the hooks on the frame.
4. Install the seat trim close-out strip at the bottom of the seat back.
5. Install the seat.