Rear Axle

Removal Procedure





1. Raise the vehicle on a hoist.
2. Remove axle shaft. Refer to Rear Axle Replacement.
3. Remove the brake pipe from the wheel cylinder.
4. Remove the brake components from the brake backing plate. Refer to Brake Lining Replacement and Wheel Cylinder Replacement.
5. Remove the bolts and washers from the axle.
6. Remove the brake backing plate from the axle.

Installation Procedure





1. Install the brake backing plate on the axle.
2. Install the bolts and washer to the brake backing plate.
3. Install the brake components to the brake backing plate. Refer to Brake Lining Replacement and Wheel Cylinder Replacement.
4. Install the brake pipe to the wheel cylinder. Refer to Hydraulic Brake System Bleeding.
5. Install the axle shaft. Refer to Rear Axle Replacement.
6. Install the wheel, tire, and brake drum.