Radio

Voltage is supplied at all times from the RADIO BAIT Fuse 19 through CKT 1140 (GRY)). This voltage feeds both radio presets and clock memory. Ignition and accessory voltage is supplied through CKT 43 (YEL) from the RADIO Fuse 17. CKT 43 (YEL) enables the radio to operate when turned on. Voltage used for dimming control is supplied through CKT 8 (GRY) from the Headlamp and Panel Dimmer Switch. When this voltage is supplied, the display intensity is controlled by the Headlamp and Panel Dimmer Switch. Lights in the unit operate at full brightness from audio system voltage until a signal is supplied from the Headlamp and Panel Dimmer Switch. CKT 1382 (PPL/WHT) is connected to the Parade Mode Switch located in the Headlamp and Panel Dimmer Switch. When the voltage is supplied through CKT 1382 (PPL/WHT), the display lighting intensity is restored to full brightness. Grounding for the unit is through Ground G200 through CKT 150 (BLK).