Operation CHARM: Car repair manuals for everyone.
Home >> GMC Truck >> 2000 >> K 2500 Truck 4WD V8-6.5L DSL Turbo VIN F >> Repair and Diagnosis >> Steering and Suspension >> Steering >> Steering Column >> Service and Repair >> - With Tilt Column >> - With Floor Shift >> Electronic Column Lock Module - Assemble

Electronic Column Lock Module - Assemble

Assembly Procedure





1. Install the lock bolt spring (3) into the steering column tilt head assembly (5).
2. Position the cutout in the lock bolt assembly (4) at the 6 o'clock position.
3. Install the lock bolt assembly (4) into the steering column tilt head assembly (5).
4. Push the lock bolt assembly (4) into the steering column tilt head assembly (5) until the lock bolt assembly is flush with the steering column tilt head assembly (5).
5. Align the lock module assembly (2) with the steering column tilt head assembly (5).

Notice: Refer to Fastener Notice in Service Precautions.

6. Screw the 3 pan head tapping screws (1) into the lock module assembly (2).
- Tighten the 3 pan head tapping screws to 7 Nm (62 inch lbs.).





7. Install the ignition and key alarm switch assembly (3) onto the lock module assembly (2) and secure by using 2 tapping screws.
- Tighten the screws to 4.7 Nm (42 inch lbs.).
8. Install the key alarm connector (1) onto the lock module assembly (2).
9. Install the upper tilt head components. Refer to Steering Column Tilt Head Housing - Assemble -Off Vehicle (Floor Shift).- With Tilt Column
pro multis · About Operation CHARM