Oil Pressure Sensor: Service and Repair

Removal Procedure

^ Tools Required
- J 25254-10A Oil Pressure Sensor Socket





1. Disconnect the electrical connector from the engine pressure sensor/switch.
2. Remove the oil pressure sensor using J 25254-10A.


Installation Procedure

^ Tools Required
- J 25254-10A Oil Pressure Sensor Socket





1. Install the oil pressure sensor.
2. Hold the oil pressure sensor fitting with a wrench to prevent from turning.
^ Using J 25254-10A tighten the oil pressure sensor to 30 Nm (22 ft. lbs.).
3. Install the electrical connector.