| Crankshaft Run Out | 0.002 |
| Crankshaft Journal Diameter #1, #2, #3, #4, #5 | 2.7482-2.7489 |
| Crankshaft Journal Taper Production (Maximum) | 0.0004 |
| Crankshaft Journal Taper Service Limit (Maximum) | 0.0010 |
| Crankshaft Journal Out-of-Round Production (Maximum) | 0.0004 |
| Crankshaft Journal Out-of-Round Service Limit (Maximum) | 0.0010 |
| Crankshaft End Play | 0.005-0.011 |
| Crankshaft Thrust Wall Width | 1.8165-1.8195 inch |
| Crankshaft Thrust Wall Maximum Runout | 0.001 inch |
| Crankpin Diameter | 2.1990-2.1996 inch |
| Crankpin Taper Production | 0.005 inch |
| Crankpin Taper Service Limit | 0.0010 inch |
| Crankpin Out-of-Round Production | 0.0005 inch |
| Crankpin Out-of-Round Service Limit | 0.0010 inch |