Fog Lamp Replacement - Front

REMOVAL PROCEDURE
1. Disconnect the electrical connector (3) from the fog lamp.
2. Remove the push pin retainers that attach the fog lamp to the bracket.
3. Remove the fog lamp adjuster bolt and spring from the adjuster nut.
4. Remove the fog lamp from the fog lamp bracket.
5. Remove the fog lamp bracket bolts and bracket, as needed.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions

1. Install the fog lamp bracket bolts and bracket, as needed.

Tighten
Tighten the fog lamp bolt to 25 N.m (18 lb ft).

2. Install the fog lamp to the fog lamp bracket.
3. Install the fog lamp adjuster bolt and spring to the adjuster nut.
4. Install the push pin retainers that attach the fog lamp to the bracket.
5. Connect the electrical connector (3) to the fog lamp.
6. Reaim the fog lights. Refer to Fog Lamp Aiming Procedure (Base/Luxury).