Tilt Head Housing - Assemble

Assembly Procedure

Tools Required
- J 23653-SIR Lock Plate Compressor





1. Install the inner race (4).
2. Install the upper bearing inner race seat (3).
3. Install the upper bearing spring (2).
4. Lubricate the turn signal cancel cam assembly (1) with synthetic grease and install.





5. Install the shaft lock shield assembly (1).





6. Install the bearing retainer using J 23653-SIR.
7. Install the SIR coil assembly. Refer to Inflatable Restraint Steering Wheel Module Coil - Assemble - Off Vehicle (Column Shift).- With Tilt Column