Window Replacement - Rear Door

REMOVAL PROCEDURE




1. Lower the window.
2. Remove the trim panel.
3. Remove the water deflector.
4. Remove the window sash channel bolts.




5. Pull the glass weatherstrip out of the window frame and the front run channel.
6. Lift the window out of the top of the door.

INSTALLATION PROCEDURE




1. Slide the window through the top of the door into the glass channels.
2. Install the glass weatherstrip.

NOTE: Refer to Fastener Notice in Service Precautions.




3. Install the window sash channel bolts.

Tighten
Tighten the window sash channel bolts to 2 N.m (18 lb in).

4. Install the water deflector.
5. Install the trim panel.