Front Seat Replacement - Bucket (Base)

Front Seat Replacement - Bucket (Base)

Removal Procedure

1. Remove the seat riser trim cover.
2. Remove the seat retaining bolts.




3. Disconnect the electrical connector (3) on the driver side, if equipped.




4. Disconnect the electrical connector (2) on the passenger side, if equipped.




5. Remove the seat from the vehicle.



Installation Procedure





1. Install the seat to the vehicle.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the seat retaining bolts.

Tighten the retaining bolts to 55 N.m (41 lb ft).





3. Connect the electrical connector (2) on the passenger side, if equipped.




4. Connect the electrical connector (3) on the drivers side, if equipped.
5. Install the seat riser trim cover.