Lumbar Bladder Replacement (Removable Seat)

Lumbar Bladder Replacement (Removable Seat)

Removal Procedure

1. Slide the seat forward.
2. Remove the seat trim close-out strip from the seat back trim panel.
3. Remove the lower screws from the seat back trim panel.
Push down and pull out at the top of the seat back trim panel and remove.
4. Remove the left and the right seat trim from the J-hooks from the seat frame.




5. Remove the rubber hose from the bladder assembly.
6. Remove the bladder mounting bars (1) from around the hooks on the frame.
7. Slide the bladder upward, off the mounting bars.
8. Remove the bladder from the seat back.



Installation Procedure





1. Install the bladder to the seat back by sliding the bladder over the bladder mounting bars (1).
2. Install the rubber hose to the bladder.
3. Install the bladder mounting bars around the hooks on the frame.
4. Install the left and the right seat trim J-hooks onto the seat frame.
5. Install the lower seat back panel bracket to the lower seat back.
Push down and in at the top of the seat back panel to secure the lower seat back.
6. Install the seat back panel screws.
7. Install the seat trim close-out strip to the seat back trim panel.
8. Slide the seat back into the original position.