Accelerator Pedal Position Sensor: Service and Repair

APP Module Replacement

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.




1. Remove the negative battery cables.
2. Remove the electrical connector.




3. Remove the mounting bolts.




4. Remove the APP module.

INSTALLATION PROCEDURE




1. Install the APP module.

NOTE: Refer to Fastener Notice in Service Precautions.




2. Install the mounting bolts.

Tighten
Tighten the mounting bolts to 1 N.m (10 lb in).




3. Install the electrical connector.
4. Install the negative battery cables.