Frame and Field Disassembly

1. Disassemble the insulated brush screws. Move the brush holder assembly with the brushes slightly away from the frame and the field assembly in order to reach across with a screwdriver and remove the screws.
2. Disassemble the frame and the field assembly.
3. Disassemble the grounded brush screws.
4. Disassemble the brushes if the brushes need replacement.
5. Use the following procedure in order to disassemble the brush springs if the brush springs need replacement:
5.1. Grasp the brush end of each brush spring with needle nose pliers.
5.2. Twist the spring end away from the brush. Remove the brush.