Closeout/Insulator Panel Replacement - Right

INSTRUMENT PANEL INSULATOR PANEL REPLACEMENT - RIGHT SIDE

Removal Procedure







1. Remove the screws that retain the instrument panel sound insulator to the following components:

- The instrument Panel
- The cowl

2. Remove the instrument panel sound insulator from the vehicle.

Installation Procedure

1. Install the instrument panel sound insulator to the vehicle.

NOTICE: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring or fasteners requiring the use of the thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the screws that retain the instrument panel sound insulator to the following components:

- The instrument panel
- The cowl

3. Tighten the screws to 1.9 Nm (17 lb.in).